Thursday 20/2/2020

Bookmark and Share
Daily News
  PandCT RSS Daily News feed

11 March 2015

UK flowmeter specialist Litre Meter ( has shipped four customised LF15 VFF positive displacement flowmeters to New Caledonia, a French territory in the South Pacific off Australia, for use in process applications at a large nickel mining operation in the region.

The rotary piston flow meters are used to measure the flow of chemicals for three discrete applications - sodium hypochlorite based biocide, a polyacrylamide dispersant and a corrosion inhibitor comprising a mix of zinc sulphate with maleic acid copolymer. The meters are pressure rated to 20 bar. Unusually, two of them are constructed from titanium for the hypochlorite measurement.

The VFF meters are fitted to pump systems at the Koniambo nickel mining operation in New Caledonia.

The chemicals are injected into pipelines via the skid installed at the mine head to prevent the build-up of sludge and corrosion in the equipment which delivers the leaching fluids that extract the ore.

Measurement of the chemical injection rate is critical because blockages caused by a build up of oxidised material, scale or emulsified sludge can result in a shutdown and unintended personal and environmental safety issues, including the risk of pollution and explosion.

Blocked pipes may have to be taken offline to remove the blockage, causing costly loss of production. Litre Meter meters assist in maintaining operational assurance and reducing production costs by measuring the flow of chemicals needed to prevent corrosion and sludge formation. Chemicals are expensive which means that their use needs to be carefully monitored.

Accurate chemical injection monitoring is provided by the LF15 Litre Meter flow meters via a central control room.

The VFF LF15 flowmeter is suitable for measuring liquids at pressure ratings up to 4,000 bar (15,000 psi) and flow rates of 0 to 45 l/hr. It covers a viscosity range from under 0.8 to above 100,000 centistokes (cSt).

As standard, the meters are constructed of 316 stainless steel with titanium rotors. Two of the meters supplied to Koniambo were customised using titanium bodies in order to deal with the aggressive nature of the chemicals being used. The low flow capability of the meters has been improved by coating the pressure balance chambers and titanium rotors using physical vapour deposition (PVD) to reduce friction. The additional hardness provided by the PVD coating also improves wear resistance.

Litre Meter CEO Charles Wemyss said: "This was an interesting order for us in terms of adapting a tried and tested application. Chemical injection in oil and gas is a staple for Litre Meter. This order showed how VFF flowmeters can be adapted to similar applications in a different industry.

"Litre Meter's VFF flowmeter is ideally suited for use in the mineral extraction industry particularly for low flow / high pressure applications like this.

"Years of experience in chemical injection applications onshore and offshore have confirmed the instrument's capability to reliably measure fluids under extreme conditions of both temperature and pressure."

For more information, please contact:

Litre Meter Ltd 
Hart Hill Barn
Granborough Road
North Marston
MK18 3RZ
Tel:  +44 (0)1296 670200
Fax:  +44 (0)1296 670999
Web: are not responsible for the content of submitted or externally produced articles and images.
Click here to email PandCT about any errors or omissions contained within this article.
Send this page
To send this page to a colleague or friend,
fill in the email addresses below...
Your email address
Their email address:
Page to be sent: shownews.asp?ID=43024

Company gateway pages
for Litre Meter Ltd:
FREE Information on the products in this article
To request more information,
fill in your email address below.
Your email address
Bookmark and Share
Product categories: Accelerometers | Actuators | Agitators | Analysers | Bearings | Compressors | Controllers | Conveyors | Drives | Enclosures | Flowmeters | Heat Exchangers | Motors | Pumps | Relays | Sensors | Transducers | Transmitters | Valves | Weighing
(c) Copyright 1999-2020 Process and Control Today Ltd  |  Reg. no 3733110  |  Email Editor  |  Email Webmaster  |  Sitemap  |  Privacy Policy